Skip to main content

Belgian Dubbel Brew Day

08-22-03Last Saturday around the time of this post I had a chance to brew my Belgian Dubbel. The wife went to see the Time Travelers Wife, which gave me a few hours of time to brew. The whole idea behind the beer was to save some money on yeast and have another Belgian style beer on-hand since I’m really digging Belgian beers right now, so is the wife. I ordered from Austin Homebrew Supply again and followed the ingredients that I had originally set-out on using. I didn’t order a half pound of wheat malt from them becasue I already had a pound on hand. One problem, they shorted me a half pound of Belgian Pale malt. Crap.

08-22-02I decided to go on with brewing anyway and get that half pound reimbursed at another time. I threw all of the grain into the mash tun and heated my strike water to 165ºF. Being that I roughly had 6.5 lbs of grain and wanted to keep a water to grain ratio of 1.25 quarts per pound the 2 gallons of water reached that temperature very quickly. I then let it all sit there for an hour and again, it only dropped 2ºF from 152ºF to 150ºF in that hour. I’m really happy with my new mash tun.

On my last brew, I had a terrible efficiency, so I wanted to fix that up a bit. I collected my first runnings and threw it back on top of the grain and collected it again. My thinking was that the water was still hot and I could grab some extra sugar.  I heated up another two gallons of water to 180ºF for the second and third runnings. On both I let them sit in the mash tun for 10 minutes. By the end I had collected 3.5 gallons of wort for the boil.

08-22-04I did my 60 minute boil using .5 oz of Styrian Goldings hops and 1 oz of Saaz hops for 15 minutes. I also threw in some Irish Moss to try and help clarity. Why I didn’t do this for the Tripel is still a good question. I cooled down the wort and pitched it on top of the yeast cake from the Tripel as that is now in a carboy.

I was shooting for a gravity of 1.062 but actually got 1.053. It was better than the Tripel but still pretty poor. Only 65% or so. I’m not sure if the problem is coming my mash, the water, or 08-22-01how Austin Homebrew Supply is crushing the grain. I’m inclined to lean towards the latter after talking to some people my the local homebrew club. Maybe new brew I will borrow on of their grain mills.

This brew marks my first experience with Belgian candy sugar as well. I used a dark variety of it. I was a bit concerned about scorching, but during the wait time with the second and third runnings I dumped all of it (1/2 lb) into the boil kettle and stirred like a madman. The kettle was sitting on the floor under the mash tun. The liquid was still hot and it dissolved pretty quickly. No scorching at all! I’ll have a few updates on both of my beers soon.

Belgian Tripel Brew Day

08-08-01Yesterday I finally got to brew my Belgian Triple. I still need to think of a good name for it and I am taking suggestions. I recieved all of my ingredients from Austin Homebrew on Wednesday and quickly discovered that I had a few problems. The first was that the Wyeast 1214 Belgian Ale yeast was warm to hot. The summers here in Texas get scorching and the trip from Austin to Lubbock is a long hot one. I did order an ice pack, but that too was warm by the time it got here. The second was that Tettnanger and Saaz came in 2-3% less than what I was anticipating. I modified the recipe a bit to get similar IBUs out of the brew. I also change a few of the times in the mash and hopping schedule.

08-08-02Friday morning, around 9:30 or so, I smacked the pack to get the yeast woken up. I didn’t plan on actually starting the brew till 4:00 in the afternoon so that gave it plenty of time to puff up. The smack pack never really puffed up much past the first 2 hours. You can see in the picture to the left that it didn’t to much. I was a bit concerned but decided that it was too late to change anything.

I mashed my grains (12 lbs Belgian Pils, .5 lbs Belgian Pale, and .5 lbs unmalted wheat) for 90 minutes at 152ºF. The strike water temperature came in at 165ºF. After the 90 minutes I took the temperature again just to see how good my new mashtun held temps. The theomerter read 150ºF! I was pretty pleased what that result. I was acutally expecting it to drop much more than that.

I collected about 2.5 gallons of water from my orginal 4 gallons. I added another 3 gallons of water that came in at 170ºF. I collected my second runnings in the main boil pot and about a gallon of third runnings in a secondary pot. The point of this is to add it to the main pot once some of it boils away. I only have a 5 gallon pot, so trying to get the most out of it is tough. This is the method I have been using and it has worked. It also allows me to get the most out of the grains that I can.

08-08-07

08-08-06I boiled each pot for 30 minutes and then combined them. I also added 1 oz. of the Tettnanger at this time. I continued the boil for another 30 minutes and added .5 oz of Saaz hops. 15 minutes later I added another .5 oz of Saaz and 5 minutes after that I added a BrewVint Yeast Fuel. Finished out the boil for another 10 minutes and started the cooling process. 90 minute total boil. When all was said and done I had collected just under 4 gallons of wort, I was shooting for 3.5 gallons, and had a gravity of 1.074.

I was pretty happy with that, but it fell short of the gravity I wanted. Part of that was due to the increased wort volume and I think Beer Tools Pro overestimated the amount of sugar I would be able to get. I didn’t add anything to bring the gravity up to where I wanted it becasue I wasn’t sure about the health of the yeast. I pitched the yeast closed it all up and went over to a friends. I came back 4 hours later and the airlock was 08-08-04bubbling away. Success! The beer isn’t going to be as strong as I had intended but that’s ok. This is my first ever big beer and I am happy with the results thus far. If I would of done some more thinking and planning I would of tried to make a session beer with whatever sugars were left in the grain bed. Something to consider next time.

The Tripel should be in the primary for a week and the secondary for another week. Then it is bottling time. My apartment stays at a pretty consitent 75ºF so it should be just fine. And finally my new brewing partner enjoying all of the new smells. If you click the read more link after this you can see some more pictures from the brew day. (more…)